40KN C-FRAME HYDRAULIC PRESS FOR ASSEMBLING
This machine is used for press-fitting of shafts, bushes and other similar parts and drawing, forming and blanking etc. of simple plate type parts.
- This press uses operation buttons for easy operation.
- Body adopts a C-type single-column structure, with good rigidity and stable accuracy.
- Hydraulic system has a compact structure with flexible and reliable operation and easy to repair. It adopts an axial piston pump, achieving rapid speed, small energy consumption and low noise.
- Controller of electrical control system is simple but reliable.
|1||Capacity of main cylinder||Primary||KN||40|
|2||Stroke of main cylinder||mm||300|
|3||Capacity of lower cylinder||KN||40|
|4||Stroke of lower cylinder||mm||40|
|6||Dimensions of worktable||L.R||mm||400|
|7||Diameter of pressure head||mm||100|
|8||Max. distance between pressure head and worktable after knocking out||mm||400|
|9||Pressure head unloaded down speed||mm/s||50-80|
|10||Pressure head loaded down speed||mm/s||7-15|
|11||Pressure head return speed||mm/s||80-100|
|12||Blanking hole diameter||mm||60|