63KN PRESS FOR DRIVE SHAFT GEAR HEATING ASSEMBLING
- This machine is mainly used for press-fitting of drive shaft gear of balancer and also for pressing of small parts, such as bending and alignment etc.
- Machine uses a composite frame structure.
- Oil pump uses high-low pressure and electromagnetic valve.
- Cylinder uses imported seals, with advanced structure and good performance.
- Machine is equipped with protection screen to protect operators.
|2||Max. working pressure of liquid||MPa||20.6|
|3||Stroke of pressure head||mm||190|
|4||Max. distance between pressure head and worktable||mm||342|
|5||Min. distance between pressure head and worktable||mm||152|
|6||Pressure head rapid down speed||mm/s||50|
|7||Pressure head slow down speed||mm/s||6|
|8||Pressure head return speed||mm/s||100|
|9||Dimensions of worktable (L.R * F.B)||mm||140*400|