久章草在线视频免费观看

  • <tbody id="qwu84"></tbody>
  • 網站名稱

    Favorites 設為主頁

    粉末成型液壓機POWDER MOLDING

    Current Column: 首頁HOME > 產品中心PRODUCTS > 專用壓力機PRESS MACHINE > 粉末成型液壓機POWDER MOLDING
    THD79-200  2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS
    • 專用壓力機 -> 粉末成型液壓機
    • THD79-200 2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS
    • 2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS Structural characteristi...
    • POWDER MOLDING
    • THD79-200 2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS
    • 2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS Structural characteristi...
    說明書下載 在線留言

    2000KN CNC FULLY AUTOMATIC HYDRAULIC PRESS FOR POWDER PRODUCTS

    Structural characteristics:
    • Three operation modes: adjustable, semi-automatic and fully automatic.
    • Stroke and pressure can be digitally set and detected. Speed and feeding number of feeding machine can be digitally set and adjusted within a certain range.
    • PLC control for electrical. IPC sets the technical parameters.
    • LCD displays detected real time curve (force-stroke-time) and history curves can be stored and checked on it.
    • It can be connected with a printer. Technical data can be stored in U disk.

    Technical parameters:
    NO. Item Unit Specification Remark
    1 Capacity KN 2000
    2 Return force KN 400
    3 Max. working pressure of liquid MPa 25
    4 Max. stroke of slide mm 400
    5 Max. opening of slide mm 1117
    6 Knock out force KN 1000
    7 Pull down force KN 1000
    8 Max. stroke of piston of knock out cylinder mm 160
    9 Dimensions of worktable L.R mm 750
    F.B mm 750
    10 Dimensions of worktable L.R mm 750
    F.B mm 400
    11 Speed of slide Down unloaded mm /s ≥100
    Pressing mm /s 2-3
    Return mm/s ≥100
    12 Knock out speed Rapid speed of knock out mm /s 50
    Slow speed of knock out mm /s 3.5
    Pull down Return mm/s 6-15
    13 Auxiliary cylinder Down pressure KN 100
    Down speed mm /s 5
    Stroke mm 50
    14 Feeding machine Dimensions mm 140*140
    Stroke mm 320
    Forward speed mm/s 100
    Backward speed mm/s 100
    15 Height of worktable surface above floor mm 1200
    16 Total power of motor KW 32

    久章草在线视频免费观看
  • <tbody id="qwu84"></tbody>