200KN HYDRAULIC PRESS FOR PLASTIC PRODUCTS
- Alignment, quality check, bending and press-fitting of parts, stamping and forming of sheets.
- Pressing of nonmetallic materials, such as plastic, powder and ceramic. Food and medicine etc.
- Simple and small structure, widely used.
- Press by slide moving up, so parts will not be contaminated by oil.
- Imported seal for cylinder.
- Operation is simple and maintenance is easy.
|2||Max. working pressure of liquid||MPa||25|
|3||Opening of slide||mm||400|
|4||Stroke of slide||mm||250|
|5||Dimensions of worktable||L.R||mm||450|
|6||Speed of slide||Up unloaded||mm /s||17|
|7||Height of worktable surface above floor||mm||1220|
|8||Total power of motor||KW||3|