63KN HYDRAULIC PRESS FOR GEAR HEATING ASSEMBLING
- This press is suitable for press-fitting of driven gears of ED01 drive shafts and pressing of small parts, such as bending and alignment etc.
- Composite frame body structure
- Pump adopts high and low pressure combination pump of Compass and direction valve of Beijing Huade importing Rexroth technology, to provide reliable driving energy for double-action cylinder.
- Cylinder adopts imported seal, with advanced structure and good performance
- This machine is equipped with photoelectric protection devices for safety of operators.
|2||Max. working pressure of liquid||MPa||20.6|
|3||Displacement of high-pressure pump||ml/r||1|
|4||Displacement of low-pressure pump||ml/r||6.8|
|6||Max. distance between pressure head and worktable||mm||342|
|7||Min. distance between pressure head and worktable||mm||152|
|8||Working area of worktable||mm||140*40|
|9||Height of worktable surface above floor||mm||750|
|10||Down speed||Rapid||mm /s||50|
|11||Return speed||mm /s||100|
|12||Power of motor||KW||1.5|