200KN HYDRAULIC PRESS FOR PLASTIC PRODUCTS
This press is mainly suitable for measurement of clearance between speed reducer bearing and bearing cover plate.
- Main body adopts welded structure.
- Turning arm mechanism can be manually pulled down through ball screws to performmeasurement for reducers with different specifications
- .Measuring mechanism performs balance by spring balancer for easy operation.
- Measuring mechanism moves on turning armby a wheel carrier, getting necessary space for measurement.
- For convenience, it is only necessary to change the measuring tooling when mode of reduction gearbox changes.
|1||Pressing force of left cylinder bearing||KN||4/cylinder|
|2||Stroke of pressing cylinder||mm||175/250|
|4||Moving distance of measuring bench||L||mm||50|
|5||Pressure head center height||mm||1000~1400|
|6||Diameter of detection cylinder||Station 1||mm||50|